Journal Articles

2016

[J26] Analysis of pultrusion process for thick glass/polyester composites: Transverse shear stress formations
Ismet Baran
Advanced Manufacturing: Polymer & Composites Science, 2(3-4):124-132;2016


[J25] A review on the mechanical modeling of composite manufacturing processes
Ismet Baran, Kenan Cinar, Nuri Ersoy, Remko Akkerman, Jesper H. Hattel
Archives of Computational Methods in Engineering, 24(2):365–395;2016


[J24] Probabilistic analysis of a thermosetting pultrusion process
Ismet Baran, Cem C. Tutum, Jesper H. Hattel
Science and Engineering of Composite Materials, 23(1):67-76;2016


2015

[J23] Investigation of process induced warpage for pultrusion of a rectangular hollow profile
Ismet Baran, Jesper H. Hattel, Remko Akkerman
Composites Part B: Engineering, 68:365-374;2015


[J22] Investigation of the residual stress state in an epoxy based specimen
Ismet Baran, Johnny Jakobsen, Jens H. Andreasen, Jesper H. Hattel, Remko Akkerman
Key Engineering Materials, 651-653:375-380;2015


[J21] Computational analysis of the interaction between impregnation, forming and curing in pultrusion
Pierpaolo Carlone, Ismet Baran, Remko Akkerman, Gaetano S. Palazzo
Key Engineering Materials, 651-653:889-894;2015


[J20] Mechanical modelling of pultrusion process: 2D and 3D numerical approaches
Ismet Baran, Jesper H. Hattel, Remko Akkerman
Applied Composite Materials; 22:99-118;2015


[J19] Constrained efficient global optimization for pultrusion process
Cem C. Tutum, Kalyanmoy Deb, Ismet Baran
Materials and Manufacturing Processes, 30(4):538-551;2015


2014

[J18] Modelling the pultrusion process of an industrial L-shaped composite profile
Ismet Baran, Remko Akkerman, Jesper H. Hattel
Composite Structures, 118:37-48;2014


[J17] Material characterization of a polyester resin system for the pultrusion process
Ismet Baran, Remko Akkerman, Jesper H. Hattel
Composites Part B: Engineering, 64:194-201;2014


[J16] Optimum design of pultrusion process via evolutionary multi-objective optimization
Cem C. Tutum, Ismet Baran, Kalyanmoy Deb
International Journal of Advanced Manufacturing Technology, 72:1205-1217;2014


[J15] Pultrusion of a vertical axis wind turbine blade part-i: 3d thermo-chemical process simulation
Ismet Baran, Cem C. Tutum, Jesper H. Hattel, Remko Akkerman
International Journal of Material Forming, 8(3):379-389;2014


[J14] Pultrusion of a vertical axis wind turbine blade part-ii: combining the manufacturing process simulation with a subsequent loading scenario
Ismet Baran, Jesper H. Hattel, Cem C. Tutum, Remko Akkerman
International Journal of Material Forming, 8(3):367-378;2014


[J13] The effect of mandrel configuration on the warpage in pultrusion of rectangular hollow profiles
Ismet Baran, Jesper H. Hattel, Remko Akkerman
Key Engineering Materials, 611-612:250-256;2014


[J12] Investigation of the spring-in of a pultruded L-shaped profile for various processing conditions and thicknesses
Ismet Baran, Jesper H. Hattel, Remko Akkerman
Key Engineering Materials, 611-612:273-279;2014


[J11] The effect of product size on the pulling force in pultrusion
Ismet Baran, Pierpaolo Carlone, Jesper H. Hattel, Gaetano S. Palazzo, Remko Akkerman
Key Engineering Materials, 611-612:1763-1770;2014


[J10] DeepWind-from idea to 5MW concept
Uwe S. Paulsen, Helge A. Madsen, Knud A. Kragh, Per H. Nielsen, Ismet Baran, Jesper Hattel, Ewen Ritchie, Krisztina Leban, Harald Svendsen, Petter A. Berthelsen
Energy Procedia, 53:23-33;2014


2013

[J9] Process induced residual stresses and distortions in pultrusion
Ismet Baran, Cem C. Tutum, Michael W. Nielsen, Jesper H. Hattel
Composites Part B: Engineering, 51:148-161;2013


[J8] The effect of thermal contact resistance on the thermosetting pultrusion process
Ismet Baran, Cem C. Tutum, Jesper H. Hattel
Composites Part B: Engineering, 45:995-1000;2013


[J7] Thermo-chemical modelling strategies for the pultrusion process
Ismet Baran, Jesper H. Hattel, Cem C. Tutum
Applied Composite Materials, 20:1247-1263;2013


[J6] Optimization of the thermosetting pultrusion process by using hybrid and mixed integer genetic algorithms
Ismet Baran, Cem C. Tutum, Jesper H. Hattel
Applied Composite Materials, 20:449-463;2013


[J5] Reliability estimation of the pultrusion process using the first- order reliability method (FORM)
Ismet Baran, Cem C. Tutum, Jesper H. Hattel
Applied Composite Materials, 20:639-653;2013


[J4] Utilizing multiple objectives for the optimization of the pultrusion process
Cem C. Tutum, Ismet Baran, Jesper H. Hattel
Key Engineering Materials, 554-557:2165-2174;2013


[J3] The internal stress evaluation of the pultruded blades for a Darrieus wind turbine
Ismet Baran, Cem C. Tutum, Jesper H. Hattel
Key Engineering Materials, 554-557:2127-2137;2013


[J2] Computational approaches for modelling the multi- physics in pultrusion process
Pierpaolo Carlone, Ismet Baran, Jesper H. Hattel, Gaetano S. Palazzo
Advances in Mechanical Engineering, vol. 2013, Article ID 301875, 14 pages, 2013. doi:10.1155/2013/301875


[J1] Design optimization of a 5 MW floating offshore vertical-axis wind turbine
Uwe S. Paulsen, Helge A. Madsen, Jesper Hattel, Ismet Baran, Per H. Nielsen
Energy Procedia,35:22-32;2013